Small Device / MDT Mount

Ball joint adjusts in different angles to avoid glare, while mounted on a flat surface.

• MDT mounting plate
• Ball joint with "LOCK-IT" clamps
• For small to medium size MDT
• 2.5" x 2.5" mounting base

Places the MDT in front of the instrument panel of Lincoln Town Cars 1998 to 2002 without the need of drilling holes.

• MDT mounting plate
• Ball joint with "LOCK-IT" clamps
• For small to medium size MDT
• 2.5" x 2.5" mounting base
• Must be installed with safety strap included

Attaches to the handrail of a bus, or any other tubular 1.25" O.D. structure.

• MDT mounting plate
• Steel base
• Ball joint with "LOCK-IT" clamps

For MDTs with data connectors located below the mounting plate.

• MDT mounting plate
• Ball joint with "LOCK-IT" clamps
• 4" high post
• 2" x 5" steel base plate
• For small to medium size MDT

Places the computer in front of the instrument panel to increase driving visibility, while being mounted on top of the dashboard.

• MDT mounting plate
• Easy to assemble kit
• Ball joint with "LOCK-IT" clamps
• 3" x 5" steel mounting base
• For small to medium size MDT

Designed to be mounted on narrow surfaces, or to be attached to mounting base PART#114-L-HiNT, or mounting bar PART#115-HiNT.

• MDT mounting plate
• Telescopic shaft can be turned in 90° increments
• In-line mounting slots
• Steel construction
• Ball joint with "LOCK-IT" clamps
• For small to medium size MDT

Designed to be installed behind the door opening mechanism of small buses.
It provides an excellent mounting surface for MDT mount PART# HiNT-124.

• Distance between slots: 4"
• Total width: 6"
• Thickness: 1/4"

Designed to host mount PART# HiNT-124, and to be installed between a vertical handrail post of a small bus and the front of the dashboard of Ford full size "E" series vans.

• 1" x 1" square steel tube
• 1-1/4" round tube "U" bolts
• 19" long

Can mount on vertical or horizontal surfaces such as vehicle ceiling, engine cover, dashboard, etc.

• MDT mounting plate
• Ball joint with "LOCK-IT" clamps
• For small to medium size MDT
• Steel construction
• Telescopic post can be turned in 90° increments
• Quick Release

Places the computer in front of the instrument panel, and mounts under the taxi meter.

Places the computer in front of the instrument panel, and the taxi meter on top.

• MDT mounting plate
• Ball joint with "LOCK-IT" clamps
• For small to medium size MDT
• Steel construction
• Telescopic post can be turned in 90° increments
• Quick Release

Mounts inside of a cup holder. Stabilizing supports screw to the external ring of the cup holder.

• MDT mounting plate
• Ball joint with "LOCK-IT" clamps
• For small to medium size MDT
• Steel construction
• Telescopic post